Today we have the latest stock ROM flash file for the Asus Zenfone 8 Flip ZS672KS powered by a Qualcomm Snapdragon 888 5G processor. To install the firmware flash file, we need software called the QFil Flash tool which can be helpful to flash the stock ROM on your device. The method is simple and easy. We have also added video and step by step tutorial to make things easier to flash the official flash file.
This process is helpful if you have bricked your device, lag, or shuttering performance, to fix Bluetooth and WiFi issues, to unroot or bypass the FRP lock. So without further wasting our time, let’s understand what is stock firmware flash file.
Asus Zenfone 8 Flip: Device Overview
The Asus Zenfone 8 flip features a 6.67-inch Super AMOLED panel with a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. It has a 90Hz refresh rate and provides support for HDR10+ content. It even has a peak brightness of 1000 nits, so outdoor visibility won’t be a problem. Under the hood, we have the Qualcomm Snapdragon 888 built on a 5nm manufacturing process. It is an octa-core processor with one Kryo 680 core clocked at 2.84 GHz, three Kryo 680 cores clocked at 2.42 GHz, and four Kryo 680 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Adreno 660.
For cameras, we have a triple camera setup overall that can flip over to the front side and work as selfie cameras or stay on the rear side and serve as the primary cameras. The triple setup consists of a 54MP primary sensor paired with an f/1.8 lens, a 12 ultrawide sensor paired with an f/2.2 lens, and an 8MP telephoto sensor paired with an f/2.4 lens. Since the rear setup also doubles up as the front setup, this makes it the best front camera setup that can record 8K videos at up to 30fps.
The smartphone is available in two storage variants: 128GB internal storage + 8GB RAM and 256GB internal storage + 8GB RAM. The smartphone comes with Android 11 out of the box with ZenUI 8 skin on top. For communications, we have Wi-Fi 802.11 a/b/g/n/ac/6e, Bluetooth 5.2, GPS, NFC, and USB Type-C 2.0. And for sensors, we have an under-display fingerprint sensor, accelerometer, gyro, proximity, and compass. Asus did not hold back in the battery front and went with a 5,000 mAh battery that can be topped up quickly using the 30W adapter included in the box. The smartphone is available in two color options: Galactic Black and Glacier Silver.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Asus Zenfone 8 Flip Stock ROM flash file on your computer.
- If your device is dead, you can unbrick using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adwares from Zenfone 8 Flip
- You can fix the boot loop issue on Zenfone 8 Flip
- Fix Unfortunately, the app has stopped error on Zenfone 8 Flip
- Fix Network related issue
- Patch Boot image to Root using Magisk
- You can unroot Zenfone 8 Flip
- To Reset or Remove FRP on your device
- Restore Zenfone 8 Flip back to Factory State
Firmware Details:
- Device Name: Asus Zenfone 8 Flip ZS672KS
- ROM Type: Stock ROM
- Gapps File: Included
- Tool Supported: QFil Flash tool
- Processor: Qualcomm Snapdragon 888 5G Processor
- Android Version: Android 11
How to Install Asus Zenfone 8 Flip ZS672KS Flash File
Before installing the Stock ROM on your Asus Zenfone 8 Flip, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.
Pre-Requirements:
- Supported device: Asus Zenfone 8 Flip ZS672KS
- Make sure to charge your device more than 50%
- You need a PC or Laptop with a USB cable.
- Take a complete backup using any method given below
- Full Data Backup without Root
- Nandroid Backup via TWRP
- Download Drivers: Qualcomm USB Drivers and Asus USB Drivers
Download Flash Files
Method 1: Instructions to Install via Recovery:
- Download the latest firmware from the above update tracker section (if available).
- Turn off your phone and enter the recovery mode by pressing the Power button +Volume UP button.
- Once you have booted into the recovery mode, select apply update from sd card.
- Locate the firmware file on your phone’s internal or external storage and select it.
- The installation will begin.
- Once the process is completed, your phone will reboot to put things into place.
- That’s it!
Methods 2: Install RAW Firmware zip file:
Suppose you have downloaded the RAW firmware zip file, then you can follow this method 2 to install the firmware on your Asus Zenfone 8 Flip ZS672KS.
Full Data Backup without Root
Nandroid Backup via TWRP
First of all, download the Asus Zenfone 8 Flip ZS672KS RAW firmware zip file and extract it on your PC.
Open the extracted folder and it should contain the flashing script, full RAW firmware files, and Android Tools.
Turn off your Asus Zenfone 8 Flip.
Enter the fastboot mode by pressing and holding the Volume Up and Power keys simultaneously.
Once your phone is powered off, hold the Volume Up and Power keys together to enter Fastboot Mode.
Connect your phone to the PC using the USB cable.
Look for the ‘flashall_AFT.cmd‘ file and double click on it to launch the flashing script.
When the script started reading in the command prompt (CMD) window, you have to wait until the process gets completed.
Once the installation is completed, your device will reboot automatically to the new update.
That’s it, guys. We hope that you’ve installed the Stock Firmware on your Asus Zenfone 8 Flip device successfully. Feel free to ask in the comments below for any queries.